For whole-home surge protectors and UPS bundles, my best overall pick is the Eaton CHSPT2SURGE for its recognizable Type 2 format and straightforward role alongside a separate UPS. The ABB THOMESURGEP stands out for buyers who want a Type 1 device with a NEMA 3R enclosure, while the Drizzlen Type BR 3-Pack suits compatible panels where breaker-style installation is the priority. The main tradeoff is coverage versus fit: surge ratings and installation type matter, but neither replaces battery backup for computers or networking gear. These products are primarily surge protective devices, not bundled UPS systems, so buyers may need to select a UPS separately. Read on for the full comparison, selection criteria, and guidance on matching protection to your panel and essential electronics.
Complete the kit
Key Takeaways
- The list is mostly surge protection, not ready-made UPS bundles. The listed products are whole-home or panel surge protective devices; buyers seeking outage runtime should plan for a separate UPS.
- Installation style separates the choices. Type 1 and Type 2 devices, direct panel-mount models, and Type BR breaker-style products are not interchangeable; panel compatibility and electrician guidance should come before amperage claims.
- Higher advertised surge-current capacity is not the only ranking factor. The EvoDevice EVOSPD2SUPER and SPD2ULTRA list 108,000A per phase, while other models list lower figures, but enclosure, listing, connection method, and documentation also affect suitability.
- Three-packs favor multi-point planning, not automatically better protection. The Drizzlen, AQOVOR, and Treasea Type BR bundles may suit compatible installations requiring multiple devices, but buyers should confirm panel fit and the purpose of each unit.
- Brand and enclosure details help narrow the field. ABB’s NEMA 3R designation is relevant for exposed locations, while Eaton’s CHSPT2 models offer a familiar Type 2 approach; neither detail removes the need to verify installation conditions.
| EvoDevice EVOSPD2SUPER Whole-House Surge Protector, 120/240V, 108,000A per Phase, 2,820 Joules |  | Best for High-Capacity Type 2 Protection | Device type: Type 2 surge protective device | Voltage: 120/240V | Maximum current: 108,000A per phase | VIEW ON AMAZON | See Our Full Breakdown |
| Bad Wolf SP240V100KA-A 100kA Type 1 Direct Panel-Mount Surge Protective Device |  | Best for Indoor or Outdoor Panel Locations | SPD type: Type 1; may be used in Type 2 applications when installed according to instructions | System voltage: 120/240VAC split-phase | Protection modes: 6: L1-L2, L1-N, L2-N, L1-G, L2-G, N-G | VIEW ON AMAZON | See Our Full Breakdown |
| HSPD Square Whole Home Surge Protective Device (Type 1 SPD), 120/240VAC |  | Best for Broad Breaker-Brand Compatibility | Model: HSPD-25 | Device type: Type 1 surge protective device | Voltage: 120/240VAC | VIEW ON AMAZON | See Our Full Breakdown |
| ABB THOMESURGEP Whole-Home Surge Protective Device, Type 1, NEMA 3R |  | Best for Service-Entrance Installation Without Breaker Spaces | Device type: Type 1 surge protective device | Voltage: 120/240V and 120/208V AC | Protection capacity: 36 kA per phase | VIEW ON AMAZON | See Our Full Breakdown |
| EvoDevice EVOSPD2SURGE Whole-House Surge Protector, 120/240V, 72 kA per Phase |  | Best for a Lower-Capacity Type 2 Alternative | Device type: Type 2 surge protective device | Voltage: 120/240V | Maximum current: 72 kA per phase | VIEW ON AMAZON | See Our Full Breakdown |
| SPD2ULTRA Whole-Home Surge Protector, 120/240V, 108,000A |  | Best for High Surge Capacity | Voltage: 120/240V AC, 60 Hz | Maximum current: 50 A | Recommended breaker: 2-pole 50 A | VIEW ON AMAZON | See Our Full Breakdown |
| Eaton CHSPT2SURGE Type 2 Whole-Home Surge Protector |  | Best for Cross-Brand Load Center Compatibility | Type: Type 2 surge protective device | Voltage: 120/240 VAC | Phase: Single | VIEW ON AMAZON | See Our Full Breakdown |
| Drizzlen Type BR Whole-Panel Circuit Breaker Surge Protective Device |  | Best for Type BR Panel Owners | Brand: Drizzlen | Model: ET003 | Part number: BRSURGE | VIEW ON AMAZON | See Our Full Breakdown |
| Drizzlen Type BR Whole-Panel Circuit Breaker Surge Protective Device, 3-Pack |  | Best Multi-Panel Pack | Brand: Drizzlen | Model: ET003 | Part number: BRSURGE | VIEW ON AMAZON | See Our Full Breakdown |
| Furniqro FHSPD36S Whole House Surge Protector, 36,000 A, 120/240V |  | Best for Indoor or Outdoor Mounting | Model: FHSPD36S | Surge capacity: 36,000 A | Voltage: 120/240V | VIEW ON AMAZON | See Our Full Breakdown |
| AQOVOR Type BR Whole-Panel Circuit Breaker Surge Protective Device, 3-Pack |  | Best Three-Pack for Type BR Panels | Brand: AQOVOR | Model: BRLSP | Circuit breaker type: Type BR | VIEW ON AMAZON | See Our Full Breakdown |
| Treasea Type BR Whole-Panel Circuit Breaker Surge Protective Device, 3-Pack |  | Best for Quick Type BR Panel Replacements | Brand: Treasea | Model: ET003 | Part number: BRSURGE | VIEW ON AMAZON | See Our Full Breakdown |
| Furniqro FHSPD72S Whole-House Surge Protector, 72,000 A, 120/240 V |  | Best High-Capacity Indoor/Outdoor Pick | Brand: Furniqro | Model: FHSPD72S | Surge capacity: 72,000 A | VIEW ON AMAZON | See Our Full Breakdown |
| Eaton CHSPT2SURGE10 Whole-Home Surge Protector |  | Best Documented Type 2 Option | Model: CHSPT2SURGE10 | Device type: Type 2 surge protective device | Surge current capacity: 60,000 A | VIEW ON AMAZON | See Our Full Breakdown |
| wholehome surge protectors and ups bundle | Voltage | Model | Mounting type | Number of poles |
|---|---|---|---|---|
| EvoDevice EVOSPD2SUPER Whole-H | 120/240V | — | — | — |
| Bad Wolf SP240V100KA-A 100kA T | — | — | — | — |
| HSPD Square Whole Home Surge P | 120/240VAC | HSPD-25 | Wall mount | 2 |
| ABB THOMESURGEP Whole-Home Sur | 120/240V and 120/208V AC | — | — | — |
| EvoDevice EVOSPD2SURGE Whole-H | 120/240V | — | — | — |
| SPD2ULTRA Whole-Home Surge Pro | 120/240V AC, 60 Hz | — | — | — |
| Eaton CHSPT2SURGE Type 2 Whole | 120/240 VAC | — | Wall mount | — |
| Drizzlen Type BR Whole-Panel C | — | ET003 | Panel mount | 2 |
| Drizzlen Type BR Whole-Panel C | — | ET003 | — | 2 |
| Furniqro FHSPD36S Whole House | 120/240V | FHSPD36S | Wall mount | 1 |
| AQOVOR Type BR Whole-Panel Cir | 120/240V | BRLSP | Panel mount | 2 |
| Treasea Type BR Whole-Panel Ci | — | ET003 | Panel mount | 2 |
| Furniqro FHSPD72S Whole-House | 120/240 V | FHSPD72S | Wall mount | 2 |
| Eaton CHSPT2SURGE10 Whole-Home | 240 volts | CHSPT2SURGE10 | — | — |
More Details on Our Top Picks
EvoDevice EVOSPD2SUPER Whole-House Surge Protector, 120/240V, 108,000A per Phase, 2,820 Joules
I’d put the EVOSPD2SUPER on the shortlist for buyers seeking a high-capacity Type 2 device installed at a compatible panel. Its stated 108,000A per-phase capacity is higher than the 72 kA per-phase rating listed for the EvoDevice EVOSPD2SURGE, while its 12 thermally protected MOVs and 2,820 joules add useful detail to the protection package. A green status LED gives a simple visual check, though it does not replace panel inspection or confirm that an electrician has verified the installation. Unlike the Bad Wolf SP240V100KA-A, this EvoDevice is Type 2 rather than a Type 1 device with an outdoor-rated enclosure. That makes it a more panel-specific choice, not an across-the-board upgrade. Buyers also need to confirm load-center compatibility and arrange proper electrical installation; the one-year warranty is limited compared with what some buyers may want from a permanent panel device.
Pros:- Stated capacity of 108,000A per phase
- Uses 12 thermally protected MOVs
- Green LED provides a quick status check
- Designed for compatibility with major load centers
Cons:- Type 2 design requires suitable electrical-panel installation and compatibility checks
- One-year warranty offers limited stated coverage
- No enclosure weather-rating information is provided
Best for: Homeowners with a compatible 120/240V load center who want a high-capacity Type 2 SPD and a visible operating-status indicator.
Not ideal for: Buyers who need an outdoor-rated Type 1 device, want a listed warranty longer than one year, or cannot confirm panel compatibility and installation requirements.
- Device type:Type 2 surge protective device
- Voltage:120/240V
- Maximum current:108,000A per phase
- Nominal discharge current:20kA
- Protection components:12 thermally protected MOVs
- Energy absorption:2,820 joules
- Status indicator:Green LED
- Warranty:1 year
Our verdict“Choose the EVOSPD2SUPER if your compatible panel calls for Type 2 protection and you value its higher stated capacity over the 72 kA EvoDevice EVOSPD2SURGE.”
Bad Wolf SP240V100KA-A 100kA Type 1 Direct Panel-Mount Surge Protective Device
The Bad Wolf SP240V100KA-A stands apart in this group because its Type 1 design and NEMA 4X/IP67 enclosure suit a wider range of panel locations, including outdoor installations. It covers six protection modes and includes green and red LEDs, giving buyers more status information than the single green indicator on either EvoDevice model. Its 100kA rating is substantial, though the EVOSPD2SUPER lists a higher 108,000A per-phase figure; the ratings should not be treated as a direct comparison without matching their measurement conventions and installation details. The 36-inch leads may simplify placement in some setups, but this is still a direct panel-wiring device, not a plug-in backup power bundle. ETL listing to UL 1449 5th Edition and the stated CSA standards add clarity on compliance, while installation still calls for electrical expertise.
Pros:- Type 1 design can also be used in Type 2 applications when installed as directed
- NEMA 4X/IP67 enclosure supports indoor and outdoor placement
- Six listed protection modes cover line, neutral, and ground paths
- ETL listed to UL 1449 5th Edition and stated CSA standards
Cons:- Requires direct electrical-panel installation
- Its 100kA rating is below the EVOSPD2SUPER’s stated 108,000A per phase
- No warranty information is supplied in the provided specifications
Best for: Homeowners or property managers who need a Type 1 SPD for a 120/240V split-phase system and want an enclosure suited to indoor or outdoor mounting.
Not ideal for: Buyers seeking a plug-in UPS or outlet-based surge strip, or anyone unable to arrange qualified panel installation.
- SPD type:Type 1; may be used in Type 2 applications when installed according to instructions
- System voltage:120/240VAC split-phase
- Protection modes:6: L1-L2, L1-N, L2-N, L1-G, L2-G, N-G
- Status indicators:Green and red LEDs
- Connection leads:36-inch, 12 AWG
- Certifications:ETL listed to UL 1449 5th Edition and CSA C22.2 No. 269.1 & 269.2
Our verdict“Pick the Bad Wolf when outdoor enclosure protection and Type 1 installation flexibility matter more than the EvoDevice EVOSPD2SUPER’s higher stated per-phase capacity.”
HSPD Square Whole Home Surge Protective Device (Type 1 SPD), 120/240VAC
The HSPD-25 is a practical pick for buyers whose main hurdle is breaker-brand compatibility: its listing says it works with any brand of standard circuit breaker. That claim gives it a broader stated fit than panel-specific options such as the Drizzlen Type BR devices, which are intended for BR-style panels. The HSPD offers up to 80 kA surge capacity in a compact unit suited to indoor or outdoor panels, but the capacity is given as 25/50/80 kA without clarifying which figure applies to a particular configuration. Compared with the ABB THOMESURGEP, it lists a higher maximum capacity but provides fewer installation and compliance details in the supplied specifications. It is a Type 1 SPD only, so buyers should not assume it replaces a complete surge-protection plan or supplies battery backup; professional installation is also part of the real cost and effort.
Pros:- States compatibility with standard circuit breakers from any brand
- Up to 80 kA stated surge capacity
- Compact form factor for indoor or outdoor panel placement
- Type 1 design for whole-home panel protection
Cons:- Requires professional electrical installation
- Capacity is listed as 25/50/80 kA without explaining the configuration behind each figure
- Provided specifications do not list certifications or a status indicator
Best for: Homeowners with a non-BR or less common panel brand who want a Type 1 whole-home SPD with broadly stated breaker compatibility.
Not ideal for: DIY buyers seeking a plug-in unit, or shoppers who need clearly specified compliance, status indicators, or UPS battery runtime.
- Model:HSPD-25
- Device type:Type 1 surge protective device
- Voltage:120/240VAC
- Surge capacity:25/50/80 kA
- Breaker compatibility:Standard breakers; stated compatible with all brands
- Mounting type:Wall mount
- Number of poles:2
- Brand:Gloyatin
Our verdict“Choose the HSPD-25 if broad stated breaker compatibility matters more than the ABB THOMESURGEP’s clearer compliance details and service-entrance specifications.”
ABB THOMESURGEP Whole-Home Surge Protective Device, Type 1, NEMA 3R
ABB’s THOMESURGEP makes sense when the installation layout matters as much as the surge rating. Its Type 1 format supports service-entrance or sub-panel installation, and it mounts without taking up breaker spaces—a useful difference from panel devices that occupy a breaker position. The 36 kA per-phase rating is lower than the HSPD-25’s listed maximum of 80 kA and the two EvoDevice models’ stated ratings, so this is not the capacity leader in the roundup. Its strength is the combination of 200 kA SCCR, LED indication, and stated UL listing and ANSI certification, with compliance information that is more specific than the HSPD-25 listing provides. It also supports 120/240V and 120/208V systems. Buyers should note that the supplied specs do not state a warranty, and the device protects against surges rather than providing UPS backup during an outage.
Pros:- Type 1 installation at a service entrance or sub-panel
- Installs without occupying breaker spaces
- Supports 120/240V and 120/208V AC systems
- UL listed and ANSI certified, with NEC 2023 Article 230.67 compliance stated
Cons:- 36 kA per phase is below the capacities listed for the EvoDevice and HSPD options
- Warranty coverage is not specified
- Not a UPS and does not provide backup power during outages
Best for: Homeowners or electricians planning service-entrance or sub-panel protection who want to preserve breaker spaces and value clearly stated compliance details.
Not ideal for: Buyers prioritizing the highest listed surge capacity, needing battery backup, or requiring a stated warranty before choosing a permanent panel device.
- Device type:Type 1 surge protective device
- Voltage:120/240V and 120/208V AC
- Protection capacity:36 kA per phase
- Nominal discharge current:10 kA
- SCCR:200 kA
- Mounting:Wall mount; service entrance or sub-panel installation without using breaker spaces
- Indicators:LED
- Compliance:NEC 2023 Article 230.67; UL listed; ANSI certified
Our verdict“Choose the ABB THOMESURGEP if space-saving Type 1 installation and stated compliance matter more to you than maximum surge capacity.”
EvoDevice EVOSPD2SURGE Whole-House Surge Protector, 120/240V, 72 kA per Phase
The EVOSPD2SURGE is the more restrained of the two EvoDevice Type 2 picks: it lists 72 kA per phase and 1,880 joules, against the EVOSPD2SUPER’s 108,000A per phase and 2,820 joules. That lower stated capacity makes this model a distinct option for buyers who do not need the larger specification, while retaining eight thermally protected MOVs and a green status LED. Both models are intended for compatible load centers, so the key choice is not installation simplicity but the difference in their listed protection figures and component counts. The EVOSPD2SURGE suits residential and light commercial 120/240V systems, yet the supplied details leave some practical questions unanswered: there is no stated enclosure weather rating, and the one-year warranty is modest for a permanently installed device. Like the other panel SPDs here, it does not provide battery backup or replace a UPS for connected electronics.
Pros:- 72 kA per-phase surge capacity for residential and light commercial systems
- Eight thermally protected MOVs
- Green LED indicates protection status
- Designed for compatibility with major load-center manufacturers
Cons:- Lower stated capacity and energy absorption than the EVOSPD2SUPER
- Requires a compatible panel and proper electrical installation
- One-year warranty and no enclosure weather rating are stated
Best for: Owners of compatible 120/240V panels who want a Type 2 SPD with thermally protected MOVs and a status light without choosing the higher-capacity EVOSPD2SUPER.
Not ideal for: Buyers who want the highest listed EvoDevice capacity, an outdoor-rated enclosure, or backup power during outages.
- Device type:Type 2 surge protective device
- Voltage:120/240V
- Maximum current:72 kA per phase
- Energy absorption:1,880 joules
- MOVs:8 thermally protected MOVs
- Status indicator:Green LED
- Enclosure materials:Copper, plastic, rubber
- Warranty:1 year
Our verdict“Pick the EVOSPD2SURGE when its 72 kA per-phase Type 2 specification meets your needs and you do not require the higher listed capacity of the EVOSPD2SUPER.”
SPD2ULTRA Whole-Home Surge Protector, 120/240V, 108,000A
The SPD2ULTRA is the high-capacity choice in this group, with a stated 108,000A surge rating, 120/240V support, and an LED indicator for checking protection status. That rating sets it apart from the Eaton CHSPT2SURGE and its listed 22 kA surge current capacity, though the figures are supplied as different product specifications and shouldn’t be treated as a direct performance comparison. The 10-year warranty adds a clear ownership benefit, while the compact body is intended for residential panel installation. The tradeoff is that this is not a plug-in UPS bundle: installation involves wiring into a breaker panel, and a 2-pole 50A breaker is recommended. I’d choose it for panel-level protection, not for backup power during an outage.
Pros:- Listed 108,000A surge rating
- LED indicator shows protection status
- 10-year warranty
- Compact dimensions suit residential panel installations
Cons:- Requires wiring into a breaker panel
- A 2-pole 50A breaker is recommended and may affect installation planning
- Provides surge protection, not outage runtime or battery backup
Best for: Homeowners seeking a high stated surge-current rating, panel-based protection, and a 10-year warranty, with access to a qualified installer.
Not ideal for: Renters, buyers looking for battery backup, or anyone unwilling to arrange breaker-panel wiring and the recommended 2-pole 50A breaker.
- Voltage:120/240V AC, 60 Hz
- Maximum current:50 A
- Recommended breaker:2-pole 50 A
- Dimensions:2.2 × 3.62 × 5.11 inches
- Operating temperature:-40 to 50°C
- Warranty:10 years
Our verdict“Choose the SPD2ULTRA if you want a high stated surge rating and warranty-backed panel protection and can handle professional installation.”
Eaton CHSPT2SURGE Type 2 Whole-Home Surge Protector
The Eaton CHSPT2SURGE makes the most sense when flexibility across load-center brands matters more than pursuing the largest stated surge figure. It supports single-phase 120/240 VAC systems, connects to load centers from any manufacturer, and adds a NEMA 4 enclosure plus an LED status indicator. Its listed 22 kA surge current capacity is more modest on paper than the SPD2ULTRA’s 108,000A rating, so buyers comparing the two should check how each manufacturer defines its ratings rather than assume they are directly equivalent. The quick-connect design may simplify the connection, but this still requires a dedicated circuit breaker and installation that follows NEC guidelines. Like the other panel-mounted options here, it does not provide battery backup; it protects against surges rather than keeping equipment running through an outage.
Pros:- Compatible with load centers from any manufacturer
- NEMA 4 enclosure
- LED status indication
- Quick-connect design
Cons:- Requires connection through a dedicated circuit breaker
- Installation must follow NEC guidelines
- Does not provide battery backup
Best for: Homeowners or electricians who need a Type 2 protector compatible with load centers from different manufacturers and want an enclosed, status-indicating unit.
Not ideal for: Buyers seeking UPS runtime, a documented long warranty, or the largest stated surge-current figure in this group.
- Type:Type 2 surge protective device
- Voltage:120/240 VAC
- Phase:Single
- Frequency:60 Hz
- Enclosure:NEMA 4
- Surge current capacity:22 kA
- Nominal discharge current:5 kA
- Mounting type:Wall mount
Our verdict“Pick the Eaton when broad load-center compatibility and an enclosed Type 2 design matter more than a higher stated surge rating.”
Drizzlen Type BR Whole-Panel Circuit Breaker Surge Protective Device
This single Drizzlen Type BR device is a panel-specific pick for buyers whose installation calls for a Type BR unit and who want surge protection integrated into the breaker panel. Its 18 kA rating is lower than the Eaton CHSPT2SURGE’s listed 22 kA capacity, while the supplied specs give less detail about enclosure, indicators, or warranty. That makes this a more narrowly defined option than the Eaton’s cross-brand load-center design: compatibility with the right panel is the deciding factor, not feature breadth. The unit uses two branch-circuit spaces, so it also takes up room that might otherwise serve other circuits. The listing describes surge protection only; there’s no battery runtime for outages, and the sparse product details leave buyers with more to verify before arranging installation.
Pros:- Designed as a Type BR whole-panel surge device
- 18 kA surge current rating is specified
- Two-pole standard circuit breaker design
- Panel-mounted format keeps protection at the electrical panel
Cons:- Uses two branch-circuit spaces
- Supplied specs do not state a warranty or status indicator
- Does not provide battery backup
Best for: Owners of compatible Type BR panels who want a single panel-mounted surge device and have two branch-circuit spaces available.
Not ideal for: People with other panel types, limited breaker space, or a preference for detailed warranty and status-indicator information before buying.
- Brand:Drizzlen
- Model:ET003
- Part number:BRSURGE
- Circuit breaker type:Standard
- Mounting type:Panel mount
- Number of poles:2
- Branch circuit spaces:2
Our verdict“Choose this single Drizzlen unit only if you have a compatible Type BR panel, available space, and no need for UPS backup.”
Drizzlen Type BR Whole-Panel Circuit Breaker Surge Protective Device, 3-Pack
The three-pack gives this Drizzlen listing a distinct role: it suits a buyer outfitting multiple compatible panels or keeping matching replacement units on hand. Each device has the same stated 18 kA surge rating and two-space footprint as the single Drizzlen Type BR unit, so the pack doesn’t add a performance advantage per panel. Compared with the Eaton CHSPT2SURGE, it is more panel-specific and supplies fewer listed details about monitoring or enclosure construction; the choice turns on Type BR compatibility and needing several units. Each protector occupies two branch-circuit spaces, which can add up when planning more than one installation. This is also surge protection, not an UPS bundle: it will not supply power when the utility goes down.
Pros:- Three devices included for multiple compatible panels
- Each unit has a stated 18 kA surge current rating
- Two-pole standard breaker design
- Panel-mount format integrates surge protection at the panel
Cons:- All three units require compatible Type BR panels
- Each device uses two branch-circuit spaces
- No UPS runtime or outage power is provided
Best for: Property owners, electricians, or maintenance teams equipping several compatible Type BR panels with the same surge device.
Not ideal for: A household needing protection for just one panel, buyers with non-Type BR load centers, or anyone expecting battery backup.
- Brand:Drizzlen
- Model:ET003
- Part number:BRSURGE
- Pack quantity:3
- Circuit breaker type:Standard
- Number of poles:2
- Branch circuit spaces per device:2
Our verdict“This pack suits buyers protecting several compatible Type BR panels, while a single-panel home is better matched to the one-device listing.”
Furniqro FHSPD36S Whole House Surge Protector, 36,000 A, 120/240V
The Furniqro FHSPD36S stands out for its stated indoor or outdoor installation and compact wall-mount format, giving it a different fit from the panel-space-consuming Drizzlen Type BR devices. Its 36,000A surge capacity is below the SPD2ULTRA’s listed 108,000A figure, but the available descriptions don’t establish that those ratings use identical measurement conditions. LED indicators offer a simple status check, and compatibility is listed for all brands of load centers and circuit breakers. The main caution is the warranty: the supplied product data lists none, unlike the SPD2ULTRA’s 10-year coverage. Installation problems may also arise from grounding or misuse, so correct setup matters. This protects against surges; it is not a battery-backed UPS for outage continuity.
Pros:- Rated for indoor or outdoor installation
- Compact wall-mount design
- LED status indicators
- Listed as compatible with all brands of load centers and circuit breakers
Cons:- No warranty is listed in the supplied product data
- Installation problems may result from grounding or misuse
- 36,000A stated surge capacity is below the SPD2ULTRA’s listed 108,000A figure
Best for: Homeowners seeking a compact, wall-mounted whole-home protector for an indoor or outdoor location and who can confirm proper grounding and installation.
Not ideal for: Buyers who prioritize a stated warranty, want the highest listed surge capacity, or need battery backup during outages.
- Model:FHSPD36S
- Surge capacity:36,000 A
- Voltage:120/240V
- System frequency:60 Hz
- Circuit breaker type:Standard
- Mounting type:Wall mount
- Number of poles:1
- Installation:Indoor or outdoor
Our verdict“Choose the FHSPD36S for flexible indoor or outdoor placement, but skip it if warranty coverage or UPS backup is a priority.”
AQOVOR Type BR Whole-Panel Circuit Breaker Surge Protective Device, 3-Pack
This bundle makes the most sense for buyers who need Type BR compatibility and want three panel-mounted devices in one purchase. Each unit is rated for 18 kA surge current on 120/240V systems, offering a panel-level approach rather than the outlet-by-outlet protection of a plug-in UPS. Compared with the Furniqro FHSPD72S, the AQOVOR is tied to Type BR breaker compatibility and gives up the Furniqro’s stated 72,000 A capacity and indoor-or-outdoor wall-mount flexibility. Its main tradeoff is installation: each device takes two branch circuit spaces and requires a pigtail connection, so panel fit and wiring matter. The three-pack is useful when multiple compatible panels need protection, but it is not a substitute for battery backup during outages.
Pros:- Three devices included for use across compatible panels
- Designed for whole-panel surge protection on 120/240V systems
- 18 kA surge current rating
- Panel-mounted format avoids using household receptacles
Cons:- Each device occupies two branch circuit spaces
- Pigtail installation calls for appropriate electrical skill
- No UPS battery or outage runtime
Best for: Homeowners or electrical contractors protecting multiple 120/240V panels that accept Type BR devices.
Not ideal for: People with panels that do not accept Type BR breakers, limited spare circuit spaces, or anyone seeking battery backup for computers and networking gear.
- Brand:AQOVOR
- Model:BRLSP
- Circuit breaker type:Type BR
- Mounting type:Panel mount
- Voltage:120/240V
- Number of poles:2
- Branch circuit spaces:2
- Pack quantity:3
Our verdict“Choose this bundle when you need three surge devices for Type BR-compatible panels and have room for their two-space installation.”
Treasea Type BR Whole-Panel Circuit Breaker Surge Protective Device, 3-Pack
Treasea’s three-pack is a straightforward choice for buyers whose panels accept its Type BR-style, two-pole panel device and who want several units on hand. The listed 18 kA surge current rating matches the AQOVOR BRLSP, so the choice between them is less about stated capacity and more about fit, installation details, and the product information available: AQOVOR specifies 120/240V operation and a one-year warranty, while Treasea’s supplied specs do not list those details. Treasea describes installation as quick, but this still occupies two circuit spaces and must be installed correctly at the panel. Unlike the wall-mounted Furniqro FHSPD72S, it is a panel-specific option, not a broadly positioned indoor/outdoor unit. It protects against surges, not power interruptions, so critical electronics still need a separate UPS.
Pros:- Three panel-mounted surge devices in one pack
- 18 kA surge current rating
- Designed for whole-panel protection
- Manufacturer describes installation as quick
Cons:- Uses two branch circuit spaces per device
- Supplied specifications do not state voltage or warranty
- No UPS function or plug-in outlets
Best for: Electrical professionals or homeowners with compatible Type BR panels who want a three-unit supply for panel protection.
Not ideal for: Buyers who need clearly documented voltage and warranty details, have little spare panel space, or need battery backup.
- Brand:Treasea
- Model:ET003
- Part number:BRSURGE
- Pack size:3
- Circuit breaker type:Standard
- Mounting type:Panel mount
- Number of poles:2
- Circuit spaces used:2 branch circuit spaces
Our verdict“Pick Treasea when you have compatible Type BR panels and value a three-pack, but verify panel fit and electrical specifications before installation.”
Furniqro FHSPD72S Whole-House Surge Protector, 72,000 A, 120/240 V
Furniqro suits buyers seeking a standalone whole-house surge protector with a stated 72,000 A capacity and status lights that show whether protection remains active. Its compact, wall-mounted housing is rated for indoor or outdoor installation, giving it more placement flexibility than the Type BR AQOVOR and Treasea devices, which use panel spaces and require a pigtail or panel connection. The Eaton CHSPT2SURGE10 is another hardwired alternative, but Furniqro lists the higher stated surge capacity; Eaton, by contrast, explicitly lists UL and NEC compliance. Furniqro’s compatibility language covers load centers and breakers from various brands, but that does not remove the need to confirm the exact installation method and panel requirements. Professional installation is recommended, and this device provides no battery runtime when the power goes out.
Pros:- Stated surge capacity of up to 72,000 A
- Indoor or outdoor installation option
- LED indicators communicate protection status
- Designed for 120/240V, 60 Hz systems
Cons:- Manufacturer recommends installation by an electrician familiar with surge protection
- Grounding or incorrect use may cause installation or startup problems
- No battery backup for outages
Best for: Homeowners seeking a higher-capacity, status-indicated surge protector for a 120/240V system with indoor or outdoor placement options.
Not ideal for: DIY buyers unfamiliar with panel wiring, shoppers who require clearly listed UL or NEC credentials in the supplied specs, or anyone needing outage backup.
- Brand:Furniqro
- Model:FHSPD72S
- Surge capacity:72,000 A
- Voltage:120/240 V
- Frequency:60 Hz
- Mounting type:Wall mount
- Number of poles:2
- Installation location:Indoor or outdoor
- Status indicators:LED indicators
Our verdict“Choose the Furniqro for its stated surge capacity and indoor/outdoor mounting flexibility, provided a qualified installer can confirm compatibility.”
Eaton CHSPT2SURGE10 Whole-Home Surge Protector
Eaton is the clearest pick here for buyers who prioritize documented installation and compliance details: the CHSPT2SURGE10 is identified as a hardwired Type 2 device, with UL listing and NEC compliance stated in the supplied information. Its 60,000 A surge capacity is below Furniqro’s listed 72,000 A, but Eaton offers a compact 5 x 5-inch enclosure, indoor/outdoor use, and LED status indicators. Compared with the AQOVOR and Treasea three-packs, it avoids being tied to a Type BR breaker model, though it still needs electrical-panel installation and professional help is recommended. This is a surge protector, not a UPS bundle: there are no battery-backed outlets, and its listed lack of a plug means devices connect through the home’s electrical system rather than directly to this unit.
Pros:- Type 2 hardwired protection for installation at an electrical panel
- UL listed and NEC compliant according to the supplied product data
- Indoor or outdoor installation with LED status indicators
- Compact 5 x 5-inch dimensions
Cons:- Professional installation is recommended
- No plug-in outlets for direct device connection
- Listed 60,000 A capacity is lower than the Furniqro FHSPD72S’s stated 72,000 A
Best for: Homeowners who want a compact, hardwired Type 2 whole-home surge protector with stated UL and NEC compliance.
Not ideal for: Buyers seeking battery runtime, direct plug-in connections, or a higher stated surge capacity than the Furniqro FHSPD72S.
- Model:CHSPT2SURGE10
- Device type:Type 2 surge protective device
- Surge current capacity:60,000 A
- Voltage:240 volts
- Installation:Hardwired at electrical panel
- Use:Indoor or outdoor
- Certifications:UL listed; NEC compliant
- Dimensions:5 x 5 inches
Our verdict“Choose Eaton when documented Type 2, UL, and NEC details matter more to you than maximum stated surge capacity or battery backup.”
How We Picked
I ranked these products around the decisions that shape a whole-home protection setup: installation type and panel compatibility, stated surge-current capacity, voltage fit, enclosure suitability, and the clarity of the product’s intended use. I also separated whole-panel surge protection from UPS battery backup, since a surge protective device can help limit transient voltage but does not keep equipment running during an outage. Products with a defined role, such as a Type 1 device or a Type 2 panel-mounted option, are easier to match to a home’s electrical design than listings with less specific positioning.
The ranking favors products that appear easier to place within a coherent protection plan, rather than treating the largest published number as an automatic win. The Eaton CHSPT2SURGE leads as a practical Type 2 reference point; ABB earns a distinct place for its Type 1 format and NEMA 3R enclosure; and the higher-capacity EvoDevice models appeal to buyers comparing stated per-phase ratings. Breaker-style three-packs rank for a narrower use case because their value depends heavily on exact panel compatibility and why multiple devices are needed. Product names and headline specifications alone do not confirm certification, included accessories, or fit, so buyers should verify current manufacturer documentation before installation.
| wholehome surge protectors and ups bundle | Model | Mounting type |
|---|---|---|
| EvoDevice EVOSPD2SUPER Whole-H | — | — |
| Bad Wolf SP240V100KA-A 100kA T | — | — |
| HSPD Square Whole Home Surge P | HSPD-25 | Wall mount |
| ABB THOMESURGEP Whole-Home Sur | — | — |
| EvoDevice EVOSPD2SURGE Whole-H | — | — |
| SPD2ULTRA Whole-Home Surge Pro | — | — |
| Eaton CHSPT2SURGE Type 2 Whole | — | Wall mount |
| Drizzlen Type BR Whole-Panel C | ET003 | Panel mount |
| Drizzlen Type BR Whole-Panel C | ET003 | — |
| Furniqro FHSPD36S Whole House | FHSPD36S | Wall mount |
| AQOVOR Type BR Whole-Panel Cir | BRLSP | Panel mount |
| Treasea Type BR Whole-Panel Ci | ET003 | Panel mount |
| Furniqro FHSPD72S Whole-House | FHSPD72S | Wall mount |
| Eaton CHSPT2SURGE10 Whole-Home | CHSPT2SURGE10 | — |
Factors to Consider When Choosing Wholehome Surge Protectors And Ups Bundles
Choosing a whole-home surge protector and UPS setup means planning for two different events: voltage spikes and power loss. A panel-mounted SPD addresses the first; a UPS supplies temporary battery power to selected equipment during the second. I would plan the electrical protection and battery runtime as separate decisions, then check that the chosen devices work with the home’s panel and the equipment that matters most.
Match the Device Type to the Panel and Installation Point
Type 1 and Type 2 labels describe different installation roles, so they should not be treated as interchangeable product tiers. A Type 1 device may be installed on the supply side under the conditions permitted by its instructions, while Type 2 products are commonly connected on the load side of the service equipment. Direct panel-mount devices and breaker-style SPDs also have different physical and wiring requirements. A common mistake is buying by voltage or surge-current rating before checking the panel brand, available breaker positions, and installation instructions. Ask a licensed electrician to confirm the permitted location and whether the device is compatible with the service equipment. That check can matter more than choosing between two products with similar headline ratings.
Read Surge Ratings Alongside the Full Specification
A large surge-current number can help compare products, but it does not describe every part of their protection performance. Check how the manufacturer defines the rating, whether it is stated per phase or for the device as a whole, and what clamping or voltage-protection information is provided. Also look for the product’s applicable safety listing and installation documentation rather than relying on a title or short listing description. A frequent buying error is assuming that a higher number guarantees a longer service life or better protection for every home. Treat headline figures as one comparison point, then weigh them against verified technical details and correct installation. When specifications are missing, ask the manufacturer or seller for documentation before committing.
Plan UPS Backup Around the Equipment That Must Stay On
A whole-home SPD does not provide battery runtime, and a UPS generally protects only the devices plugged into it. Start by listing what needs to remain powered during an outage, such as a modem, router, desktop computer, or network storage device. Add the equipment’s wattage and decide how long it needs to run; a UPS sized only by outlet count may not meet that runtime target. Avoid connecting high-draw appliances to a small UPS unless its instructions specifically support that load. For many homes, a modest UPS for communications and computing pairs more sensibly with a panel SPD than trying to back up every circuit. Keep surge protection and battery backup as separate line items in the plan.
Check Enclosure and Location Before Choosing a Model
Where the SPD will be mounted affects what enclosure and environmental rating are appropriate. A NEMA 3R enclosure, such as the designation listed for the ABB THOMESURGEP, signals a different installation consideration from an indoor-only setup, but the manufacturer’s instructions still govern placement. Buyers sometimes focus on the device rating and overlook exposure to weather, physical clearance, or the route from the panel. Those details can affect whether a particular model can be installed safely and neatly at the intended location. Confirm the enclosure rating, permitted mounting location, and required wiring path before ordering. If the installation is outdoors or in a damp service area, have the electrician verify that the product is approved for those conditions.
Treat Bundles and Multi-Packs as an Installation Plan
A three-pack is useful only when there is a clear reason to install multiple units and each one fits its intended panel or circuit. It does not automatically provide broader whole-home coverage than a single correctly selected service-panel SPD. Before buying, identify whether the extra devices are intended for separate panels, replacement stock, or specific branch-circuit applications, and confirm the manufacturer allows that arrangement. Another common mistake is assuming that Type BR in a product name guarantees compatibility with every panel that uses similarly labeled breakers. Verify the exact panel model and product approval information. If the use case for the extra units is unclear, a single compatible device and a separately selected UPS may be a more straightforward plan.
Compare Maintenance, Indicators, and Replacement Needs
Surge protectors can wear after repeated events, so check how a model signals that protection has been reduced or lost. Look for status lights, audible alerts, replaceable modules, and the manufacturer’s instructions for inspection or replacement. Do not assume that an illuminated indicator proves every part of the installation is working as intended; it only reports what the device is designed to monitor. Ask who will check the unit after a significant surge or electrical event and whether the device can be serviced without replacing the full assembly. A low-maintenance model may suit a homeowner who rarely checks the electrical panel, while a serviceable design may appeal to someone who prefers replaceable components. Include those ownership details in the comparison alongside initial specifications.
Frequently Asked Questions
Do these products include a UPS, or do I need to buy one separately?
The listed products are described as whole-home or panel surge protective devices, not as UPS units with batteries. A panel SPD helps limit transient voltage from reaching a home’s electrical system, while a UPS supplies temporary power to equipment connected to it. If you need internet or computer runtime during an outage, choose a separate UPS sized for the connected load and desired backup time. Check that the UPS has enough capacity for the equipment’s wattage, not just enough outlets. Treat the two purchases as parts of one protection plan, rather than expecting one device to do both jobs.
Should I choose a Type 1 or Type 2 whole-home surge protector?
The right type depends on the intended installation location, service equipment, and the product’s instructions—not simply on which label sounds more protective. Type 1 and Type 2 devices are designed for different connection points, and local electrical rules and manufacturer requirements determine what is allowed. Have an electrician check the panel and service layout before selecting a model. If you are comparing the Eaton CHSPT2SURGE with the ABB THOMESURGEP, their different type designations and enclosure details are meaningful distinctions, not a ranking of universal superiority. Buy only after the installer confirms the specific device suits the home.
Can I install a Type BR surge protector in any panel that accepts BR breakers?
No. A product name that includes Type BR does not by itself confirm compatibility with every panel or service configuration. Check the exact panel model, the SPD manufacturer’s compatibility information, required breaker position, and installation instructions. This matters especially for the Drizzlen, AQOVOR, and Treasea multi-packs, since several units do not make an incompatible device fit. Ask an electrician to verify the match before ordering or installing. If compatibility documentation is unclear, choose a product with confirmed approval for the panel rather than guessing from a similar breaker label.
Is a three-pack a better choice than one whole-panel surge protector?
Not automatically. A multi-pack makes sense when the installation calls for multiple compatible devices, such as distinct panels or an application specifically supported by the manufacturer. For a single service panel, one correctly selected SPD may be the more direct solution, while extra units can add cost and installation complexity without a clear benefit. Confirm whether the pack’s devices are intended for separate locations and whether each location has the required panel compatibility. If your main need is backup during outages, set aside part of the plan for a UPS rather than assuming additional SPDs provide runtime.
Which specifications should I verify before hiring an electrician to install one?
Gather the home’s service voltage, panel make and model, the product’s type and wiring requirements, and its installation and safety documentation. Check whether the advertised surge-current figure is per phase or total, and review other available protection specifications instead of relying on that number alone. Confirm the enclosure is approved for the intended location and note any clearance or lead-length requirements. Also ask how the unit indicates loss of protection and what maintenance or replacement the manufacturer recommends. Providing these details before the work begins helps the electrician confirm fit and identify missing information.
Conclusion
For most buyers comparing the listed panel devices, I would start with the Eaton CHSPT2SURGE as the best overall Type 2 option in this roundup, then confirm panel fit with an electrician. The Drizzlen Type BR 3-Pack is my best value-style pick only when a verified installation plan calls for multiple compatible units; otherwise, a multi-pack may add complexity without a clear payoff. For a premium-oriented choice, the ABB THOMESURGEP’s Type 1 format and NEMA 3R enclosure make it the distinctive option for suitable installation conditions, while the EvoDevice EVOSPD2SUPER is worth comparing for its stated 108,000A-per-phase rating. Beginners should choose based on confirmed panel compatibility and have a licensed electrician select and install the device, rather than choosing by the largest rating. For specific needs, consider ABB for an appropriate exposed-location installation, a compatible Type BR product where breaker-style mounting is required, and a separate UPS for computers or networking gear that must keep running during an outage. None of the listed products is presented as a complete surge-protector-and-UPS bundle, so plan for those functions separately.
